CRUD Operations

CRUD operations are those which deal with creating, reading, updating, and deleting documents.

Key-value Pair Notation

Key-value pairs appear in many different contexts in the MongoDB Ruby driver, and there are some quirks of syntax with regard to how they can be notated which depend on which version of Ruby you’re using.

When constructing a document, the following syntax is acceptable and correct for Ruby version 1.9 and later:

document = { name: "Harriet", age: 36 }

If you’re using Ruby version 2.2 or greater, you can optionally enclose your keys in quotes.

document = { "name": "Harriet", "age": 36 }

If you need to use any MongoDB operator which begins with $, such as $set, $gte, or $near, you must enclose it in quotes. If you’re using Ruby version 2.2 or greater, you can notate it as follows:

collection.update_one({ name: "Harriet" }, { "$set": { age: 42 } })

If you’re using an earlier version of Ruby, use the hashrocket symbol:

collection.update_one({ name: "Harriet" }, { "$set" => { age: 42 } })

Quoted strings and hashrockets for key-value pairs will work with any version of Ruby:

collection.update_one({ "name" => "Harriet" }, { "$set" => { age: 42 } })

Creating Documents

To insert documents into a collection, select a collection on the client and call insert_one orinsert_many.

Insert operations return a Mongo::Operation::Result object which gives you information about the insert itself.

On MongoDB 2.6 and later, if the insert fails, an exception is raised, because write commands are used.

On MongoDB 2.4, an exception is only raised if the insert fails and the write concern is 1 or higher.

client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')

result = client[:artists].insert_one( { :name => 'FKA Twigs' } )
result.n # returns 1, because 1 document was inserted.

result = client[:artists].insert_many([
  { :name => 'Flying Lotus' },
  { :name => 'Aphex Twin' }
])
result.inserted_count # returns 2, because 2 documents were inserted.

Reading

The Ruby driver provides a fluent interface for queries using the find method on the collection. Various options are available to the find method.

The query is lazily executed against the server only when iterating the results – at that point the query is dispatched and a Mongo::Cursor is returned.

To find all documents for a given filter, call find with the query:

client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')

client[:artists].find(:name => 'Flying Lotus').each do |document|
  #=> Yields a BSON::Document.
end

 

Query Options

To add options to a query, chain the appropriate methods after the find method. Note that the underlying object, the Mongo::Collection::View, is immutable and a new object will be returned after each method call.

client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')

documents = client[:artists].find(:name => 'Flying Lotus').skip(10).limit(10)
documents.each do |document|
  #=> Yields a BSON::Document.
end

The following is a full list of the available options that can be added when querying and their corresponding methods as examples.

Option Description
allow_partial_results For use with sharded clusters. If a shard is down, allows the query to return results from the shards that are up, potentially only getting a portion of the results.
batch_size(Integer) Specifies the size of each batch of documents the cursor will return on eachGETMORE operation.
comment(String) Adds a comment to the query.
hint(Hash) Provides the query with an index hint to use.
limit(Integer) Limits the number of returned documents to the provided value.
max_scan(Integer) Sets the maximum number of documents to scan if a full collection scan would be performed.
no_cursor_timeout MongoDB automatically closes inactive cursors after a period of 10 minutes. Call this for cursors to remain open indefinitely on the server.
projection(Hash)

Specifies the fields to include or exclude from the results.

client[:artists].find.projection(:name => 1)
read(Hash)

Changes the read preference for this query only.

client[:artists].find.read(:mode => :secondary_preferred)
show_disk_loc(Boolean) Tells the results to also include the location of the documents on disk.
skip(Integer) Skip the provided number of documents in the results.
snapshot Execute the query in snapshot mode.
sort(Hash)

Specifies sort criteria for the query.

client[:artists].find.sort(:name => -1)

Additional Query Operations

count
Get the total number of documents an operation returns.
client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')

client[:artists].find(:name => 'Flying Lotus').count
distinct
Filters out documents with duplicate values. Equivalent to the SQL distinct clause.
client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')

client[:artists].find.distinct(:name )

Tailable Cursors

For capped collections you may use a tailable cursor that remains open after the client exhausts the results in the initial cursor. The following code example shows how a tailable cursor might be used:

client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')
client[:artists].drop
client[:artists, capped: true, size: 512].create

result = client[:artists].insert_many([
  { :name => 'Flying Lotus' },
  { :name => 'Aphex Twin' }
])

enum = client[:artists].find({}, cursor_type: :tailable_await).to_enum

while true
  doc = enum.next
  # do something
  sleep(1)
end

 

Read Preference

Read preference determines the candidate replica set members to which a query or command can be sent. They consist of a mode specified as a symbol, an array of hashes known as tag_sets, and two timing options: local_threshold and server_selection_timeout.

local_threshold
Defines the upper limit in seconds of the latency window between the nearest server and suitable servers to which an operation may be sent. The default is 15 milliseconds, or 0.015 seconds.
server_selection_timeout
Defines how long to block for server selection before throwing an exception. The default is 30,000 milliseconds, or 30 seconds.

For more information on the algorithm used to select a server, please refer to the Server Selection documentation, available on GitHub.

The read preference is set as an option on the client or passed an option when a command is run on a database.

# Set read preference on a client, used for all operations
client = Mongo::Client.new([ '127.0.0.1:27017' ],
                           read: { mode: :secondary,
                                   tag_sets: [ { 'dc' => 'nyc' } ]
                                  } )

# Set read preference for a given command
client.database.command( { collstats: 'test' }, read: { mode: secondary,
                                                     tag_sets: [ { 'dc' => 'nyc' } ] } )

Mode

There are five possible read preference modes. They are :primary, :secondary,:primary_preferred, :secondary_preferred, :nearest. Please see the read preference documentation in the MongoDB Manual for an explanation of the modes and tag sets.

Tag sets

The tag_sets parameter is an ordered list of tag sets used to restrict the eligibility of servers for selection, such as for data center awareness.

A read preference tag set (T) matches a server tag set (S) – or equivalently a server tag set (S) matches a read preference tag set (T) — if T is a subset of S.

For example, the read preference tag set { dc: 'ny', rack: 2 } matches a secondary server with tag set { dc: 'ny', rack: 2, size: 'large' }.

A tag set that is an empty document matches any server, because the empty tag set is a subset of any tag set. This means the default tag_sets parameter [{}] matches all servers.

 

Updating

Updating documents is possible by executing a single or multiple update, or by using the $findAndModifycommand.

update_one

client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')
artists = client[:artists]

result = artists.find(:name => 'Goldie').update_one("$inc" => { :plays =>  1 } )
result.n # Returns 1.

result = artists.update_one( { :name => 'Goldie' }, { "$inc" => { :plays =>  1 } } )
result.n # Returns 1.

update_many

result = artists.find(:label => 'Hospital').update_many( "$inc" => { :plays =>  1 } )
result.modified_count # Returns the number of documents that were updated.

result = artists.update_many( { :label => 'Hospital' }, { "$inc" => { :plays =>  1 } } )
result.modified_count # Returns the number of documents that were updated.

replace_one

result = artists.find(:name => 'Aphex Twin').replace_one(:name => 'Richard James')
result.modified_count # Returns 1.

result = artists.replace_one( { :name => 'Aphex Twin' }, { :name => 'Richard James' } )
result.modified_count # Returns 1.

To update documents and return a document via $findAndModify, use one of the three provided helpers:find_one_and_delete, find_one_and_replace, or find_one_and_update. You can opt to return the document before or after the modification occurs.

find_one_and_delete

client = Mongo::Client.new( [ '127.0.0.1:27017' ], :database => 'music')
artists = client[:artists]

artists.find(:name => 'José James').find_one_and_delete # Returns the document.

find_one_and_replace

doc = artists.find(:name => 'José James').find_one_and_replace(:name => 'José')
doc # Return the document before the update.

doc = artists.find_one_and_replace({ :name => 'José James' }, { :name => 'José' })
doc # Return the document before the update.

doc = artists.find(:name => 'José James').
  find_one_and_replace( { :name => 'José' }, :return_document => :after )
doc # Return the document after the update.

find_one_and_update

doc = artists.find(:name => 'José James').
  find_one_and_update( '$set' => { :name => 'José' } )
doc # Return the document before the update.

doc = artists.find_one_and_update( { :name => 'José James' }, { '$set' => { :name => 'José' } } )
doc # Return the document before the update.

find_one_and_replace

doc = artists.find(:name => 'José James').
  find_one_and_replace( { '$set' => { :name => 'José' } }, :return_document => :after )
doc # Return the document after the update.

doc = artists.find_one_and_replace(
  { :name => 'José James' },
  { '$set' => { :name => 'José' } },
  :return_document => :after
)
doc # Return the document after the update.

Deleting

delete_one

client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'music')
artists = client[:artists]

result = artists.find(:name => 'Björk').delete_one
result.deleted_count # Returns 1.

result = artists.delete_one(:name => 'Björk')
result.deleted_count # Returns 1.

delete_many

result = artists.find(:label => 'Mute').delete_many
result.deleted_count # Returns the number deleted.

result = artists.delete_many(:label => 'Mute')
result.deleted_count # Returns the number deleted.

Courtesy: MongoDB Website
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s